56Standard 2of5Items Parameters Defaults Refer to:Enable, without C/DEnable, with C/DScanning Standard 2of5Disable √Minimum number of digits readablefor Standard 2of5 3 digitsMaximum number of digits readablefor Standard 2of51 to 99 digits99 digits(See Note 2.)Enable √Transmission of a check digitfor Standard 2of5 DisableSection 10.2.1 (5)(See Note 3.)EnableSpecification of the number of digits forStandard 2of5, by bar code scanning Disable √ Section 7.2Interleaved 2of5Items Parameters Defaults Refer to:Enable, without C/D √Enable, with C/DScanning Interleaved 2of5DisableMinimum number of digits readablefor Interleaved 2of5 4 digitsMaximum number of digits readablefor Interleaved 2of52 to 99 digits99 digits(See Note 2.)Enable √Transmission of a check digitfor Interleaved 2of5 DisableSection 10.2.1 (5)(See Note 3.)EnableSpecification of the number of digits forInterleaved 2of5, by bar code scanning Disable √ Section 7.2Codabar (NW-7)Items Parameters Defaults Refer to:Enable, without C/D √Enable, with C/DScanning Codabar (NW-7)DisableMinimum number of digits readablefor Codabar (NW-7) 4 digitsMaximum number of digits readablefor Codabar (NW-7)3 to 99 digits(including start/stop codes) 99 digits(See Note 2.)Enable √Transmission of a check digitfor Codabar (NW-7) DisableSection 10.2.1 (5)(See Note 3.)(Note 2) The setting range differs from the number of digits that the scanner can actually read.(Note 3) To enable the transmission of a check digit, it is also necessary to select the "Enable, with C/D" parameterfor scanning.: Can be changed only with the configuration software.
