55UPC-A/E, EAN-13/8Items Parameters Defaults Refer to:Enable √Scanning UPC-A, UPC-E, EAN-13 andEAN-8 DisableEnableScanning UPC/EAN with 2-digit add-on Disable √EnableScanning UPC/EAN with 5-digit add-on Disable √Enable √Transmission of the number system characterof UPC-A DisableEnable √Transmission of the number systemcharacter of UPC-E DisableEnable √Transmission of padding characters "0" forUPC-A DisableEnableTransmission of padding characters "0" forUPC-E Disable √Enable √Transmission of a check digit for UPC-A DisableEnable √Transmission of a check digit for UPC-E DisableEnable √Transmission of a check digit for EAN-13 DisableEnable √Transmission of a check digit for EAN-8 DisableEnable conversionTransmission format of EAN-8(Conversion to EAN-13) Disable conversion √Enable conversionTransmission format of UPC-E(Conversion to UPC-A) Disable conversion √Section 10.2.1 (5)Enable √Transmission of country code for EAN-13 DisableSection 10.2.1 (5)(See Note 1.)EnableConversion to ISBN/ISSN formatfor EAN-13 Disable √ Section 10.2.1 (5)(Note 1) A country code is in the upper two digits of the prefix character field in EAN-13.: Can be changed only with the configuration software.
