Eaton PRC-E Series Instruction Manual

Contents

16Ethernet networkPRC-E Series Instruction Manual MN014003EN August 2015 www.eaton.comStep 7 Select “Obtain IP Address Automatically”Step 8 Click “OK”. Close the network adapter.Step 9 Each controller Maintenance Port is preconfiguredwith the fixed IP address set at 192.168.222.1. Once theEthernet patch cable is connected between the personalcomputer and the PRC controller front Maintenance Port, theuser can login to the controller by opening a standard Webbrowser and typing 192.168.222.1 into the browser’s addressbar (also know as the location bar or URL bar) and pressingthe “Enter” button.The PRC splash screen should open. In a few moments,the User Name and Password dialog will open.Step 10 Type the user name and password in theappropriate box and click “OK”.●● Default user name: admin●● Default password: adminA splash screen will open.After the splash screen, the Breaker status Web pagewill open.Refer to the “Web page programming” section onpage 46 for additional information on programming andconfiguration of Network IP of the PRC1500E and thePRC2000E controllers using the Web pages.