CHAPTER 8 - PXG600E CONFIGURATION WEB PAGE109EATON PXG600E User Manual • IM02603003E Rev 5, 11-May-2012 • Firmware Version 5.03:3835Save and RestoreChoosing this option will cause the PXG600E to save the currentconfiguration or to restore one that was previously saved.NOTICE: After you establish the initial configuration, or update it,you should save the configuration using the Save and Restorefeature. This is a useful function should you ever need to restorethe latest configuration.NOTICE: If, for any reason, you need to use the Dual FunctionRestore Switch to restore the PXG600E to the factory defaultconfiguration you can use the restore function to return to yourmost recent configuration.NOTICE: If you have set any additional parameters or alarmattributes to the default EDS, they will be lost or become floatingto a node with no value attribute. This will cause the affecteddevice to display improperly. After the restore has completed, makesure you edit the EDS with the correct parameter and alarmattribute values.NOTICE: Before you save the configuration, make sure youunderstand where the configuration file will be saved so you canfind it when you need to restore it. The downloading process isdependent on the browser you are using.Saving the Configuration - FireFox1. If you are using FireFox, the location of the saved file is determined bythe “Tools Options” setting. Go to the “Main” tab in “Tools Options” andselect where the file will be downloaded to. This must be done beforeyou download the file. An example is shown in Figure 110.Figure 1102. Click the BROWSE button (Figure 110, A) and locate the file folder thatyou want to save the configuration in.3. The path for the folder will appear in the field shown (Figure 110, B).4. Click OK (Figure 110, C).PXG600E_345B AC
