CHAPTER 3 - INTRODUCTION9EATON PXG600E User Manual • IM02603003E Rev 5, 11-May-2012 • Firmware Version 5.03:3835Chapter 3 IntroductionProduct Overview• Provides web-enabled monitoring of power systems• Easily integrates into existing Ethernet infrastructure• Translates INCOM, QCPort and Modbus RTU data into web pages• 96 Devices Maximum supported between the three portsIndividual port limits:• INCOM port – 64 device limit• COM1 port – 32 device limit, supports either QCPort or Modbus RTUdevices• COM2 port – 32 device limit, supports either QCPort or Modbus RTUdevicesTherefore, INCOM port + COM1 port + COM2 port cannot exceed96 devicesFeatures• Open device supportSupports Eaton electrical and third-party products• Web-enabledData can be viewed from any location with a web browser• Real-time power monitoringNetwork managers can view critical device data and make informeddecisions• ScalableEasily add devices with no additional equipment or costEaton Power Xpert ArchitectureEaton Power Xpert Architecture provides the framework to unify the entirepower system. It connects power systems with communication andmanagement systems to provide a holistic approach to the entire powersystem. This strategic, system-level focus is integral to PowerChainManagement Solutions. It provides increased reliability, cost efficiencies,enhanced safety and risk mitigation, and allows for the more effective use ofcapital. Eaton Power Xpert Architecture is comprised of both software andhardware components including meters, gateways and connectivity devices.
