Eclipse EC-P50 Installation Manual
Also see for EC-P50: User manual
                                                    | |
Contents
| 
P0016-LI-03.01 43View Event Log 21*Selecting this option allows the event log to be viewed. Thefollowing keys are used when navigating through the log:* Go backward.# Go forward.Press R to exit this option.Print Event Log 22*Selecting this option causes the contents of the event log to besent to the printer. Press R to exit this option.Either Com1 or Com2 must be configured for “Printer”mode in order to use this feature.Call UDL 23*Selecting this option will cause the on-board communicator to callthe remote computer modem, so that a remote link can beestablished.The remote computer must be setup so that it is readyto receive the call. Only select this option wheninstructed to do so by the remote computer operator.Chime on/off 24*Selecting this option will globally turn chime on or off.Change Code 81*Selecting this option allows you to change your own access code.After selecting this option enter the new access code (4 - 6 digits)followed by *.Program Mode 91*Selecting this option takes you back to the normal engineer’sprogram mode.View Zone Status 92*Selecting this option either from engineer’s mode or the usermenu allows you view the status/count of each zone. Thefollowing keys are used when using this option:# View next zone.* View previous zone.Press 0 to 4 to select the zone bank number.Press A to toggle between status and count.Press R to exit this option.Confirm Devices 98*Selecting this option either from engineer’s mode or the usermenu allows you view and confirm the devices connected to thecontrol panel network. See “Confirm Devices” on page 14.Exit Menu 99*Selecting this option returns the system to the normal disarmedstate. |
Related manuals for Eclipse EC-P50
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine