Eclipse EC-P50 Installation Manual
Also see for EC-P50: User manual
                                                    | |
Contents
| 
P0016-LI-03.01 7Control Panel Layout13 4 6251. Main Printed Circuit Board (PCB)The main PCB that provides the terminals connection to remotekeypads and detection devices, see PCB Layout on next page forfull details.2. Switched Mode Power SupplyThe switch mode power supply module is housed under thisprotected area and provides power to the main PCB via the three-way harness.3. Mains ConnectionThe AC Mains supply is connected to a 3 way Euro Type fusedterminal block, which is fitted with a 500mA fuse.Fuse T500mALENTo Power SupplyModule4. Mains Supply Cable EntryThe mains supply cable must be routed into the control panelhousing via this cable entry.5. Communication ModuleAn optional Eclipse Communication Module can be clipped intothe housing under the main PCB.6. Standby BatteryThe system housing will accept a 12V 7Ah battery to providecontinued operation in the event of an AC mains failure. Connectthe red battery lead to the positive terminal of the battery andthen connect the black battery lead to the negative terminal.Control PanelR DNetworkBAT12V 7AhSealed Lead Acid BatteryThe system will only become “live” when the AC supply isconnected or the “Battery On” pins are shorted, seeitem 18 of PCB layout. |
Related manuals for Eclipse EC-P50
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine