3-52 C70 CAPACITOR BANK PROTECTION AND CONTROL SYSTEM – INSTRUCTION MANUALADD DEVICE TO SOFTWARE CHAPTER 3: INSTALLATION3Figure 3-56: Identifying the UR device type6. In the wizard, click the Next button and complete the process. The files are installed in the directory indicated, and theinstallation program automatically creates icons and adds an entry to the Windows start menu.The UR device is added to the EnerVista Launchpad window, as shown.Figure 3-57: UR device added to Launchpad window7. For other than English, configure the language for the front panel in the EnerVista software under Settings > ProductSetup > Display Properties. User-entered strings are not translated, for example relay names, so setting the languagenow ensures that the names are entered/displayed in the required language. For the EnerVista software language,access the View > Language menu item.3.7 Add device to softwareYou connect remotely to the C70 through the rear RS485 or Ethernet port with a computer running the EnerVista UR Setupsoftware. The C70 also can be accessed locally with a computer through the front panel RS232 or USB port or the rearEthernet port using the Quick Connect feature.The following procedures are outlined:• Add device for serial access; see the Configure Serial Connection section• Add device for the rear Ethernet port; see the Configure Ethernet Connection section• Add device for access using a modem; see the Configure Modem Connection section
