4-44 C70 CAPACITOR BANK PROTECTION AND CONTROL SYSTEM – INSTRUCTION MANUALFRONT PANEL INTERFACE CHAPTER 4: INTERFACES4The label package shipped with every C70 contains the three default labels, the custom label template sheet, and the labelremoval tool.If the default labels are suitable for your application, insert them in the appropriate slots and program the LEDs to matchthem. If you require custom labels, use the following procedures to remove the original labels and insert the new ones.To set up and use the label removal tool:1. Bend the tabs at the left end of the tool upwards as shown.Bend the tab at the center of the tool tail as shown.To remove the LED labels from the C70 front panel and insert the custom labels:1. Use the knife to lift the LED label and slide the label tool underneath. Ensure that the bent tabs are pointing away fromthe relay.
