CHAPTER 4: INTERFACES FRONT PANEL INTERFACEC70 CAPACITOR BANK PROTECTION AND CONTROL SYSTEM – INSTRUCTION MANUAL 4-474buttons.4.2.5.2 Standard front panelAfter programming LEDs and pushbuttons under Settings > Product Setup > User-Programmable Leds and User-Programmable Pushbuttons, labels can be created for the front panel.To create LED and pushbutton labels for a standard front panel:1. In the EnerVista software, if the C70 is not already listed in the Offline Window area, add it by right-clicking it andselecting the Add Device to Offline Window option.2. Click the File > Front Panel Report menu item and select the device.3. In the Front Panel Report window, double-click an LED or pushbutton slot and type a label. If you need to see theexisting front panel remotely, access Actual Values > Front Panel for the online device. If you need to see the In thefigure, note that labelling is being done for the third set of LEDs because the second panel of LEDs was factory-labelled.
