GE Multilin D30 Line Distance Protection System 1-11 GETTING STARTED 1.1 IMPORTANT PROCEDURES11 GETTING STARTED 1.1IMPORTANT PROCEDURESPlease read this chapter to help guide you through the initial setup of your new GE Mutilin structured template.1.1.1 CAUTIONS AND WARNINGSBefore attempting to install or use the relay, it is imperative that all NOTE, CAUTION and WARNING icons in this documentare reviewed to help prevent personal injury, equipment damage, or downtime.1.1.2 INSPECTION CHECKLIST1. Open the relay packaging and inspect the unit for physical damage.2. View the rear nameplate and verify that the correct model has been ordered.Figure 1–1: REAR NAMEPLATE (EXAMPLE)3. Ensure that the following items are included:• Instruction manual.• GE EnerVista CD (includes the EnerVista UR Setup software and manuals in PDF format).• Mounting screws.For product information, instruction manual updates, and the latest software updates, please visit the GE Multilin website athttp://www.GEmultilin.com.If there is any noticeable physical damage, or any of the contents listed are missing, please contact GEMultilin immediately.GE MULTILIN CONTACT INFORMATION AND CALL CENTER FOR PRODUCT SUPPORT:GE Multilin215 Anderson AvenueMarkham, OntarioCanada L6E 1B3TELEPHONE: (905) 294-6222, 1-800-547-8629 (North America only)FAX: (905) 201-2098E-MAIL: gemultilin@ge.comHOME PAGE: http://www.GEmultilin.comCAUTIONWARNING®®Technical Support:Tel: (905) 294-6222Fax: (905) 201-2098 http://www.GEmultilin.comModel:Mods:Wiring Diagram:Inst. Manual:Serial Number:Firmware:Mfg. Date:D30E00HCHF8AH6AM6BP8BX7A000837772A3GEK-113269MAZB98000029D2005/01/05Control Power:Contact Inputs:Contact Outputs:88-300V DC @ 35W / 77-265V AC @ 35VA300V DC Max 10mAStandard Pilot Duty / 250V AC 7.5A360V A Resistive / 125V DC Break4A @ L/R = 40mS / 300WRATINGS:D30 GE MultilinMade inCanada- M A A B 9 7 0 0 0 0 9 9 -Line Distance Relay837805A1.CDRNOTE