GE Multilin D30 Line Distance Protection System 6-136 ACTUAL VALUES 6.3 METERING66.3.2 SOURCESa) MAIN MENUPATH: ACTUAL VALUES METERING SOURCE SRC1This menu displays the metered values available for each source.Metered values presented for each source depend on the phase and auxiliary VTs and phase and ground CTs assignmentsfor this particular source. For example, if no phase VT is assigned to this source, then any voltage, energy, and power val-ues will be unavailable.b) PHASE CURRENT METERINGPATH: ACTUAL VALUES METERING SOURCE SRC 1 PHASE CURRENT SOURCE SRC 1 PHASE CURRENT SRC 1 See page 6–13.MESSAGE GROUND CURRENT SRC 1 See page 6–14.MESSAGE PHASE VOLTAGE SRC 1 See page 6–14.MESSAGE AUXILIARY VOLTAGE SRC 1 See page 6–15.MESSAGE POWER SRC 1 See page 6–15.MESSAGE FREQUENCY SRC 1 See page 6–16. PHASE CURRENT SRC 1SRC 1 RMS Ia: 0.000b: 0.000 c: 0.000 AMESSAGE SRC 1 RMS Ia:0.000 AMESSAGE SRC 1 RMS Ib:0.000 AMESSAGE SRC 1 RMS Ic:0.000 AMESSAGE SRC 1 RMS In:0.000 AMESSAGE SRC 1 PHASOR Ia:0.000 A 0.0°MESSAGE SRC 1 PHASOR Ib:0.000 A 0.0°MESSAGE SRC 1 PHASOR Ic:0.000 A 0.0°MESSAGE SRC 1 PHASOR In:0.000 A 0.0°MESSAGE SRC 1 ZERO SEQ I0:0.000 A 0.0°MESSAGE SRC 1 POS SEQ I1:0.000 A 0.0°