GE D30 Instruction Manual

Also see for D30 series: Communications manual Communications guide Instruction manual Instruction manual Instruction manual

Contents

2-6 D30 Line Distance Protection System GE Multilin2.1 INTRODUCTION 2 PRODUCT DESCRIPTION2The order codes for the reduced size vertical mount units with the process bus module are shown below.2.1.3 REPLACEMENT MODULESReplacement modules can be ordered separately as shown below. When ordering a replacement CPU module or face-plate, please provide the serial number of your existing unit.Not all replacement modules may be applicable to the D30 relay. Only the modules specified in the order codes areavailable as replacement modules.Replacement module codes are subject to change without notice. Refer to the GE Multilin ordering page at http://www.GEindustrial.com/multilin/order.htm for the latest details concerning D30 ordering options.Table 2–6: D30 ORDER CODES (REDUCED SIZE VERTICAL UNITS WITH PROCESS BUS)D30 - * ** - * * * - F ** - H ** - M ** - P/R ** Reduced Size Vertical Mount (see note regarding P/R slot below)BASE UNIT D30 | | | | | | | | | Base UnitCPU E | | | | | | | | RS485 and RS485G | | | | | | | | RS485 and multi-mode ST 10Base-FH | | | | | | | | RS485 and multi-mode ST redundant 10Base-FJ | | | | | | | | RS485 and multi-mode ST 100Base-FXK | | | | | | | | RS485 and multi-mode ST redundant 100Base-FXL | | | | | | | | RS485 and single mode SC 100Base-FXM | | | | | | | | RS485 and single mode SC redundant 100Base-FXN | | | | | | | | RS485 and 10/100Base-TSOFTWARE 00 | | | | | | | No Software Options03 | | | | | | | IEC 61850; not available for Type E CPUsMOUNT/COATING V | | | | | | Vertical (3/4 rack)B | | | | | | Vertical (3/4 rack) with harsh environmental coatingFACEPLATE/ DISPLAY F | | | | | English displayD | | | | | French displayR | | | | | Russian displayA | | | | | Chinese displayK | | | | | Enhanced front panel with English displayM | | | | | Enhanced front panel with French displayQ | | | | | Enhanced front panel with Russian displayU | | | | | Enhanced front panel with Chinese displayL | | | | | Enhanced front panel with English display and user-programmable pushbuttonsN | | | | | Enhanced front panel with French display and user-programmable pushbuttonsT | | | | | Enhanced front panel with Russian display and user-programmable pushbuttonsV | | | | | Enhanced front panel with Chinese display and user-programmable pushbuttonsPOWER SUPPLY H | | | | 125 / 250 V AC/DC power supplyL | | | | 24 to 48 V (DC only) power supplyPROCESS BUS MODULE | 81 | | Standard 4CT/4VTDIGITAL INPUTS/OUTPUTS XX XX XX No Module4A 4 Solid-State (no monitoring) MOSFET outputs4B 4 Solid-State (voltage with optional current) MOSFET outputs4C 4 Solid-State (current with optional voltage) MOSFET outputs4D 16 digital inputs with Auto-Burnishing4L 14 Form-A (no monitoring) Latching outputs67 8 Form-A (no monitoring) outputs6A 2 Form-A (voltage with optional current) and 2 Form-C outputs, 8 digital inputs6B 2 Form-A (voltage with optional current) and 4 Form-C outputs, 4 digital inputs6C 8 Form-C outputs6D 16 digital inputs6E 4 Form-C outputs, 8 digital inputs6F 8 Fast Form-C outputs6G 4 Form-A (voltage with optional current) outputs, 8 digital inputs6H 6 Form-A (voltage with optional current) outputs, 4 digital inputs6K 4 Form-C and 4 Fast Form-C outputs6L 2 Form-A (current with optional voltage) and 2 Form-C outputs, 8 digital inputs6M 2 Form-A (current with optional voltage) and 4 Form-C outputs, 4 digital inputs6N 4 Form-A (current with optional voltage) outputs, 8 digital inputs6P 6 Form-A (current with optional voltage) outputs, 4 digital inputs6R 2 Form-A (no monitoring) and 2 Form-C outputs, 8 digital inputs6S 2 Form-A (no monitoring) and 4 Form-C outputs, 4 digital inputs6T 4 Form-A (no monitoring) outputs, 8 digital inputs6U 6 Form-A (no monitoring) outputs, 4 digital inputs6V 2 Form-A outputs, 1 Form-C output, 2 Form-A (no monitoring) latching outputs, 8 digital inputsINTER-RELAYCOMMUNICATIONS(select a maximum of 1 per unit)For the last module, slot P is used for digitalinput/output modules; slot R is used for inter-relaycommunications modules.2A C37.94SM, 1300nm single-mode, ELED, 1 channel single-mode2B C37.94SM, 1300nm single-mode, ELED, 2 channel single-mode2E Bi-phase, single channel2F Bi-phase, dual channel2G IEEE C37.94, 820 nm, 128 kbps, multimode, LED, 1 Channel2H IEEE C37.94, 820 nm, 128 kbps, multimode, LED, 2 Channels72 1550 nm, single-mode, LASER, 1 Channel73 1550 nm, single-mode, LASER, 2 Channel74 Channel 1 - RS422; Channel 2 - 1550 nm, single-mode, LASER75 Channel 1 - G.703; Channel 2 - 1550 nm, Single-mode LASER76 IEEE C37.94, 820 nm, 64 kbps, multimode, LED, 1 Channel77 IEEE C37.94, 820 nm, 64 kbps, multimode, LED, 2 Channels7A 820 nm, multi-mode, LED, 1 Channel7B 1300 nm, multi-mode, LED, 1 Channel7C 1300 nm, single-mode, ELED, 1 Channel7D 1300 nm, single-mode, LASER, 1 Channel7E Channel 1 - G.703; Channel 2 - 820 nm, multi-mode7F Channel 1 - G.703; Channel 2 - 1300 nm, multi-mode7G Channel 1 - G.703; Channel 2 - 1300 nm, single-mode ELED7H 820 nm, multi-mode, LED, 2 Channels7I 1300 nm, multi-mode, LED, 2 Channels7J 1300 nm, single-mode, ELED, 2 Channels7K 1300 nm, single-mode, LASER, 2 Channels7L Channel 1 - RS422; Channel 2 - 820 nm, multi-mode, LED7M Channel 1 - RS422; Channel 2 - 1300 nm, multi-mode, LED7N Channel 1 - RS422; Channel 2 - 1300 nm, single-mode, ELED7P Channel 1 - RS422; Channel 2 - 1300 nm, single-mode, LASER7Q Channel 1 - G.703; Channel 2 - 1300 nm, single-mode LASER7R G.703, 1 Channel7S G.703, 2 Channels7T RS422, 1 Channel7W RS422, 2 ChannelsNOTENOTE