CHAPTER 4: INTERFACES ENERVISTA SOFTWARE INTERFACED30 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL 4-74Figure 4-5: Settings template with two settings specified as editable5. Click the Save button to save changes to the settings template.6. Continue through any other settings window to specify all viewable settings.The next time that the device/settings are accessed, only those specified as viewable/editable display in the menuhierarchy.4.1.7.3 Add password protection to a templateGE recommends that templates be saved with password protection to maximize security.To add password protection to a settings file template:1. In the Offline Window area, right-click the device and select the Template Mode > Password Protect Templateoption.The software prompts for a template password. This password must be at least four characters in length.2. Enter and re-enter the new password, then click OK to continue.The settings file template is now secured with password protection.4.1.7.4 View the settings templateOnce all necessary settings are specified for viewing, users are able to view the settings template on the online device orsettings file. There are two ways to specify the settings view with the settings template feature:• Display only those settings available for editing• Display all settings, with settings not available for editing greyed-outTo display only the settings available for editing:1. Right-click the device in the Online or Offline Window area and apply the template by selecting the Template Mode >When templates are created for online settings, the password is added during the initial template creation step. Itdoes not need to be added after the template is created.
