3-20 D30 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUALWIRING CHAPTER 3: INSTALLATION3For high-density input/output modules 6W and 6X, use the following guidelines to connect:• 12 to 24 AWG (3.3 mm2 to 0.2 mm2 ), single wire termination• 16 to 24 AWG (1.31 mm2 to 0.2 mm2 ), multiple wire termination with matching wire sizes and stranding. Two wiresmaximum per circuit.• Suggested wiring screw tightening torque is a minimum 4.43 in-lb (0.5 Nm) and maximum 5.31 in-lb (0.6 Nm)• Minimum suggested temperature rating for the conductors is 75°C• Wire type: copper• Do not use with SL power supply moduleTable 3-3: Contact input and output module assignmentsWhere a tilde “~” symbol appears, substitute the slot position of the module. Where a number sign “#” appears,substitute the contact number.When current monitoring is used to seal-in the form-A and solid-state relay contact outputs, give theFlexLogic operand driving the contact output a reset delay of 10 ms to prevent damage of the outputcontact (in situations when the element initiating the contact output is bouncing, at values in theregion of the pickup value).~6A module ~6B module ~6C module ~6D moduleTerminalassignmentOutput orinputTerminalassignmentOutput orinputTerminalassignmentOutput TerminalassignmentOutput~1 Form-A ~1 Form-A ~1 Form-C ~1a, ~1c 2 Inputs~2 Form-A ~2 Form-A ~2 Form-C ~2a, ~2c 2 Inputs~3 Form-C ~3 Form-C ~3 Form-C ~3a, ~3c 2 Inputs~4 Form-C ~4 Form-C ~4 Form-C ~4a, ~4c 2 Inputs~5a, ~5c 2 Inputs ~5 Form-C ~5 Form-C ~5a, ~5c 2 Inputs~6a, ~6c 2 Inputs ~6 Form-C ~6 Form-C ~6a, ~6c 2 Inputs~7a, ~7c 2 Inputs ~7a, ~7c 2 Inputs ~7 Form-C ~7a, ~7c 2 Inputs~8a, ~8c 2 Inputs ~8a, ~8c 2 Inputs ~8 Form-C ~8a, ~8c 2 Inputs~6E module ~6F module ~6G module ~6H moduleTerminalassignmentOutput orinputTerminalassignmentOutput TerminalassignmentOutput orinputTerminalassignmentOutput orinput~1 Form-C ~1 Fast Form-C ~1 Form-A ~1 Form-A~2 Form-C ~2 Fast Form-C ~2 Form-A ~2 Form-A~3 Form-C ~3 Fast Form-C ~3 Form-A ~3 Form-A~4 Form-C ~4 Fast Form-C ~4 Form-A ~4 Form-A~5a, ~5c 2 Inputs ~5 Fast Form-C ~5a, ~5c 2 Inputs ~5 Form-A~6a, ~6c 2 Inputs ~6 Fast Form-C ~6a, ~6c 2 Inputs ~6 Form-A~7a, ~7c 2 Inputs ~7 Fast Form-C ~7a, ~7c 2 Inputs ~7a, ~7c 2 Inputs~8a, ~8c 2 Inputs ~8 Fast Form-C ~8a, ~8c 2 Inputs ~8a, ~8c 2 Inputs~6K module ~6L module ~6M module ~6N moduleTerminalassignmentOutput TerminalassignmentOutput orinputTerminalassignmentOutput orinputTerminalassignmentOutput orinput~1 Form-C ~1 Form-A ~1 Form-A ~1 Form-A~2 Form-C ~2 Form-A ~2 Form-A ~2 Form-A
