5-98 D30 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUALPRODUCT SETUP CHAPTER 5: SETTINGS5ANALOG IN 1 DBRange: 0.000 to 100.000% in steps of 0.001Default: 0.000%This setting specifies the deadband for the ANALOG IN 1 VALUE. The deadband is used to determine when to update thedeadbanded magnitude from the instantaneous magnitude. The deadband is a percentage of the difference betweenthe "max." and "min." values. Here, the "max." and "min." are as specified by the settings ANALOG IN 1 MAX and ANALOG IN1 MIN.See the Deadband Settings section earlier for a description of deadbanded values.ANALOG IN 1 MINRange: -1000000000.000 to 1000000000.000 in steps of 0.001Default: 0.000This setting specifies the "min." value used in deadband calculations. The scaling of this setting is the same as used by/GGIO4.AnIn01.instMag.f. This setting is stored as an IEEE 754 / IEC 60559 floating point number. Because ofthe large range of this setting, not all possible values can be stored. Some values are rounded to the closest possiblefloating point number.ANALOG IN 1 MAXRange: -1000000000.000 to 1000000000.000 in steps of 0.001Default: 1000000.000This setting specifies the "max." value used in deadband calculations. The scaling of this setting is the same as used by/GGIO4.AnIn01.instMag.f. This setting is stored as an IEEE 754 / IEC 60559 floating point number. Because ofthe large range of this setting, not all possible values can be stored. Some values are rounded to the closest possiblefloating point number.File transfer by IEC 61850The D30 supports file transfer by IEC 61850. The approach is as follows, using the SISCO AX-S4 61850 client software as anexample.1. In the AX-S4 61850 Explorer window, click the Tools menu and access the SISCO File Transfer Utility.2. Select the Remote AR Name from the drop-down list. Available files appear in the File Specification area on the rightside of the window.3. With the Copy option active, select a file to transfer and click the Go button. The file is copied and displays in the Locallist on the left side of the window.4. Repeat the process to transfer any other files.
