3-64 F650 DIGITAL BAY CONTROLLER GEK-113000-AF3.2 HUMAN-MACHINE INTERFACE (HMI) CHAPTER 3: INTERFACES, SETTINGS & ACTUAL VALUESFigure 3-38: Input/output viewing screenThis option brings the system back to the one-line diagram.This option shows the real status of all inputs and outputs in the selected board. Depending on the type of board, withor without supervision, the screen varies depending on the board characteristics.The first line of this screen shows the slot where the board is located, F, G, H or J, and the type of board. The viewmenu differentiates inputs and outputs; the active status (ON) is represented by the lighting of the correspondinginput or output.The legend at the bottom of the screen indicates how to navigate:Esc: Prev. Enter: Menu. : Chg CardEsc: Prev.Returns to the general I/O screenEnter: Menu.Provides access to the I/O menu (next, view, test input, test output).: Chg CardPressing the up-down key or Moving the shuttle key to the left or right provides access to the status of inputs/outputs for the different boards available in the relay.This option allows testing the input activation (in emulation mode). The displayed screen is similar to the viewingscreen, but in this case the user can operate the different relay inputs.This screen shows the Input name lit up, showing that this is an Input emulation mode.The first relay input appears blinking and between brackets; the user can select a different input by pressing up-downkey or rotating the enter/shuttle key. When the shuttle key is pressed, the selected input is activated. Navigationthrough this screen is indicated by the following legend:Esc: Exit Text. Enter: Chg Input.IO Card F. Type: 2, # IN 8, # OUT 8Input (ON OFF) Outputnext >VIEW< test input test output0 CC1 8 Va COIL11 CC2 9 Vb COIL12 CC3 10 Va COIL23 CC4 11 Vb COIL24 CC5 12 Isense15 CC6 13 Isense16 CC7 14 SUP217 CC8 15 SUP22
