4-50 G30 GENERATOR PROTECTION SYSTEM – INSTRUCTION MANUALFRONT PANEL INTERFACE CHAPTER 4: INTERFACES4values. Continually pressing the MESSAGE right arrow from a header display displays specific information for the category.Conversely, continually pressing the MESSAGE left arrow from a setting value or actual value display returns to the headerdisplay.Default values are indicated in this instruction manual in mixed case. In the example shown here, the default access level isRestricted.Example4.2.6.2 Graphical front panelAccess the main menu by pressing the Home pushbutton, then the Menu Tab pushbutton.Use the Up and Down arrow pushbuttons to select a submenu, then press the Right or ENTER pushbutton to drill into thatsubmenu. The Left and ESCAPE pushbuttons back up the menu hierarchy.The Page Up and Page Down Tab pushbuttons also navigate through the list. When there is only a single page of options,they jump to the first and last entries.The options displayed depend on order code.Highest level Lowest level (setting value) SETTINGS PRODUCT SETUP SECURITY ACCESS LEVEL:Restricted SETTINGS SYSTEM SETUP ACTUAL VALUES STATUSPress the MENU key until the Actual Values header page appears. This page contains systemand relay status information. SETTINGS PRODUCT SETUPPress the MENU key until the Settings header page appears. This category contains settings toconfigure the relay. SECURITYPress the MESSAGE right arrow once to display the first sub-header (Security).ACCESS LEVEL:RestrictedPress the MESSAGE right arrow once to display the first setting for Security. SECURITYPress the MESSAGE left arrow to return to the Security heading. DISPLAY PROPERTIESPress the MESSAGE down arrow to display the second setting sub-header associated with theProduct Setup header.LANGUAGE:EnglishPress the MESSAGE right arrow once to display the first setting for Display Properties. SETTINGS SYSTEM SETUPPress the MESSAGE left arrow to return to the Display Properties page, then again to return tothe Product Setup Page. Press the MESSAGE down arrow to move to the next Settings page. Thispage contains settings for System Setup.
