6-6 G30 GENERATOR PROTECTION SYSTEM – INSTRUCTION MANUALSTATUS CHAPTER 6: ACTUAL VALUES66.3.5 Teleprotection inputsACTUAL VALUES STATUS TELEPROTECTION INPUTSThe present state of teleprotection inputs from communication channels 1 and 2 are shown here. The state displayed isthat of corresponding remote output unless the channel is declared failed.6.3.6 Contact outputsACTUAL VALUES STATUS CONTACT OUTPUTSThe present state of the contact outputs is shown here. The first line of a message display indicates the ID of the contactoutput. For example, ‘Cont Op 1’ refers to the contact output in terms of the default name-array index. The second line ofthe display indicates the logic state of the contact output.For form-A contact outputs, the state of the voltage and current detectors is displayed as Off, VOff, IOff, On, IOn, and VOn.For form-C contact outputs, the state is displayed as Off or On.6.3.7 Virtual outputsACTUAL VALUES STATUS VIRTUAL OUTPUTSThe present state of up to 96 virtual outputs is shown here. The first line of a message display indicates the ID of the virtualoutput. For example, ‘Virt Op 1’ refers to the virtual output in terms of the default name-array index. The second line of thedisplay indicates the logic state of the virtual output, as calculated by the FlexLogic equation for that output.The G30 is provided with optional IEC 61850 capability. This feature is specified as a software option at thetime of ordering. See the Order Codes section of chapter 2 for details. TELEPROTECTION INPUTS TELEPROTECTIONINPUT 1-1: OffRange: On, Off TELEPROTECTIONINPUT 1-16: OffRange: On, Off TELEPROTECTIONINPUT 2-1: OffRange: On, Off TELEPROTECTIONINPUT 2-16: OffRange: On, Off CONTACT OUTPUTS Cont Op 1OffRange: On, Off, VOff, VOn, IOn, IOff Cont Op xxOffRange: On, Off, VOff, VOn, IOn, IOff VIRTUAL OUTPUTS Virt Op 1OffRange: On, Off Virt Op 96OffRange: On, Off
