5-14 M60 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUALPRODUCT SETUP CHAPTER 5: SETTINGS53. Select the user access rights by enabling the check box of one or more fields.The table outlines access rights.Table 5-1: Access rights summary4. Click OK to add the user account to the system.Modify user privilegesThe following pre-requisites are required to modify user privileges in the EnerVista security management system:• The user modifying the privileges must have administrator rights• The EnerVista security management system must be enabled (the Enable Security check box is enabled)To modify user privileges:1. Select the Security > User Management item from the top menu to open the user management window.2. Locate the username in the User field.Field DescriptionDelete Entry Deletes the user account when exiting the user management windowActual Values Allows the user to read actual valuesSettings Allows the user to read setting valuesCommands Allows the user to execute commandsEvent Recorder Allows the user to use the digital fault recorderFlexLogic Allows the user to read FlexLogic valuesUpdate Info Allows the user to write to any function to which they have read privileges. When any of the Settings, EventRecorder, and FlexLogic check boxes are enabled by themselves, the user is granted read access. When anyof them are enabled in conjunction with the Update Info box, they are granted read and write access. Theuser is not granted write access to functions that are not checked, even if the Update Info field is enabled.Admin The user is an EnerVista UR Setup administrator and has all of the administrative rights. Exercise cautionwhen granting administrator rights.
