GE M60 Instruction Manual
Also see for M60: Communications manualCommunications guideInstruction manualInstruction manual
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              | |
Contents
|
CHAPTER 2: PRODUCT DESCRIPTION SPECIFICATIONSM60 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL 2-1522.4 SpecificationsSpecifications are subject to change without notice.2.4.1 Protection elementsThe operating times include the activation time of a trip rated form-A output contact unless otherwise indicated. FlexLogicoperands of a given element are 4 ms faster. Take this into account when using FlexLogic to interconnect with otherprotection or control elements of the relay, building FlexLogic equations, or interfacing with other intelligent electronicdevices (IEDs) or power system devices via communications or different output contacts. If not specified, the operate timesgiven here are for a 60 Hz system at nominal system frequency. Operate times for a 50 Hz system are 1.2 times longer.THERMAL MODELThermal overload curves: standard curve (Motor), FlexCurve™, standard curve (Motor) with voltage dependent function,IEC curveStandard curve (motor) time multiplier: 0.00 to 16.00 in steps of 0.01Motor curve time multiplier: 0.00 to 16.00 in steps of 0.01FlexCurve curve time multiplier: 0.00 to 600.00 in steps of 0.01IEC curve time constant: 0 to 1000 in steps of 1Thermal overload pickup: pu = overload factor FLAOverload factor (OF): 1.00 to 1.50 in steps of 0.01Motor full load current (FLA): 0.050 to 1.000 pu in steps of 0.001CONTACT INPUTS/OUTPUTS | 4A | 4 Solid-State (no monitoring) MOSFET outputs| 4B | 4 Solid-State (voltage with optional current) MOSFET outputs| 4C | 4 Solid-State (current with optional voltage) MOSFET outputs| 4D | 16 Contact inputs with Auto-Burnishing (maximum of three modules within a case)| 4L | 14 Form-A (no monitoring) Latching outputs| 67 | 8 Form-A (no monitoring) outputs| 6A | 2 Form-A (voltage with optional current) and 2 Form-C outputs, 8 contact inputs| 6B | 2 Form-A (voltage with optional current) and 4 Form-C outputs, 4 contact inputs| 6C | 8 Form-C outputs| 6D | 16 Contact inputs| 6E | 4 Form-C outputs, 8 contact inputs| 6F | 8 Fast Form-C outputs| 6G | 4 Form-A (voltage with optional current) outputs, 8 contact inputs| 6H | 6 Form-A (voltage with optional current) outputs, 4 contact inputs| 6K | 4 Form-C and 4 Fast Form-C outputs| 6L | 2 Form-A (current with optional voltage) and 2 Form-C outputs, 8 contact inputs| 6M | 2 Form-A (current with optional voltage) and 4 Form-C outputs, 4 contact inputs| 6N | 4 Form-A (current with optional voltage) outputs, 8 contact inputs| 6P | 6 Form-A (current with optional voltage) outputs, 4 contact inputs| 6R | 2 Form-A (no monitoring) and 2 Form-C outputs, 8 contact inputs| 6S | 2 Form-A (no monitoring) and 4 Form-C outputs, 4 contact inputs| 6T | 4 Form-A (no monitoring) outputs, 8 contact inputs| 6U | 6 Form-A (no monitoring) outputs, 4 contact inputs| 6V | 2 Form-A outputs, 1 Form-C output, 2 Form-A (no monitoring) latching outputs, 8 contact inputsCT/VT MODULES(not available for the C30)| 8F | Standard 4CT/4VT| 8G | Sensitive Ground 4CT/4VT| 8H | Standard 8CT| 8L | Standard 4CT/4VT with enhanced diagnostics| 8N | Standard 8CT with enhanced diagnostics| 8V | Standard 8VT with enhanced diagnosticsINTER-RELAY COMMUNICATIONS | 2A | C37.94SM, 1300 nm single-mode, ELED, 1 channel single-mode| 2B | C37.94SM, 1300 nm single-mode, ELED, 2 channel single-mode| 2E | Bi-phase, single channel| 2F | Bi-phase, dual channel| 2G | IEEE C37.94, 820 nm, 128 kbps, multimode, LED, 1 Channel| 2H | IEEE C37.94, 820 nm, 128 kbps, multimode, LED, 2 Channels| 2I | Channel 1 - IEEE C37.94, multimode, 64/128 kbps; Channel 2 - 1300 nm, single-mode, Laser| 2J | Channel 1 - IEEE C37.94, multimode, 64/128 kbps; Channel 2 - 1550 nm, single-mode, Laser| 72 | 1550 nm, single-mode, Laser, 1 Channel| 73 | 1550 nm, single-mode, Laser, 2 Channel| 74 | Channel 1 - RS422; Channel 2 - 1550 nm, single-mode, Laser| 75 | Channel 1 - G.703; Channel 2 - 1550 nm, single-mode Laser| 76 | IEEE C37.94, 820 nm, 64 kbps, multimode, LED, 1 Channel| 77 | IEEE C37.94, 820 nm, 64 kbps, multimode, LED, 2 Channels| 7A | 820 nm, multimode, LED, 1 Channel| 7B | 1300 nm, multimode, LED, 1 Channel| 7C | 1300 nm, single-mode, ELED, 1 Channel| 7D | 1300 nm, single-mode, Laser, 1 Channel| 7E | Channel 1 - G.703; Channel 2 - 820 nm, multimode| 7F | Channel 1 - G.703; Channel 2 - 1300 nm, multimode| 7G | Channel 1 - G.703; Channel 2 - 1300 nm, single-mode ELED| 7H | 820 nm, multimode, LED, 2 Channels| 7I | 1300 nm, multimode, LED, 2 Channels| 7J | 1300 nm, single-mode, ELED, 2 Channels| 7K | 1300 nm, single-mode, Laser, 2 Channels| 7L | Channel 1 - RS422; Channel 2 - 820 nm, multimode, LED| 7M | Channel 1 - RS422; Channel 2 - 1300 nm, multimode, LED| 7N | Channel 1 - RS422; Channel 2 - 1300 nm, single-mode, ELED| 7P | Channel 1 - RS422; Channel 2 - 1300 nm, single-mode, Laser| 7Q | Channel 1 - G.703; Channel 2 - 1300 nm, single-mode Laser| 7R | G.703, 1 Channel| 7S | G.703, 2 Channels| 7T | RS422, 1 Channel| 7W | RS422, 2 ChannelsTRANSDUCER INPUTS/OUTPUTS | 5A | 4 DCmA inputs, 4 DCmA outputs (only one 5A module is allowed)| 5C | 8 RTD inputs| 5D | 4 RTD inputs, 4 DCmA outputs (only one 5D module is allowed)| 5E | 4 DCmA inputs, 4 RTD inputs| 5F | 8 DCmA inputsUR - ** - * |
Related manuals for GE M60
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine