CHAPTER 9: MAINTENANCE BATTERYM60 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL 9-996. Unscrew all four screws (not three) that attach the metal cover to the module.7. Slide the metal cover away from the clips about 1 cm (1/4 inch) and remove the cover.8. Unclip the black plastic holder that keeps the battery in place. The plastic clips into the socket at the bottom on bothsides. Use a flat-head screwdriver if you cannot unclip the plastic with your fingers.9. Observe the + and - polarity of the battery and replace it with the same polarity as marked on the battery holder.Replace the battery with the identical make and model. For example, do not use a rechargeable battery.Figure 9-7: Battery location on SH/SL power supply module10. Reinstall the battery clip and the metal cover, and reinsert the power supply module into the unit.11. Power on the unit.12. Dispose of the old battery as outlined in the next section.9.6.3 Dispose of battery9.6.3.1 EN Battery disposalThis product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See theproduct documentation for specific battery information. The battery is marked with this symbol, which may includelettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling return the battery to your supplier or to adesignated collection point. For more information see: www.recyclethis.info.9.6.3.2 CS Nakládání s bateriemiTento produkt obsahuje baterie, které nemohou být zneškodněny v Evropské unii jako netříděný komunální odpadu. Vizdokumentace k produktu pro informace pro konkrétní baterie. Baterie je označena tímto symbolem, který může zahrnovati uvedena písmena, kadmium (Cd), olovo (Pb), nebo rtuť (Hg). Pro správnou recyklaci baterií vraťte svémudodavateli nebona určeném sběrném místě. Pro více informací viz: www.recyclethis.info.
