3-4 M60 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUALPANEL CUTOUTS CHAPTER 3: INSTALLATION3The relay must be mounted such that the faceplate sits semi-flush with the panel or switchgear door, allowing the operatoraccess to the keypad and the RS232 communications port. The relay is secured to the panel with the use of four screwssupplied with the relay.Figure 3-4: Vertical dimensions (enhanced panel)7.48”(190.0 mm)15.00”(381.0 mm)13.56”(344.4 mm)1.38”(35.2 mm)9.58”(243.4 mm)7.00”(177.7 mm)4.00”(101.6 mm)7.10”(180.2 mm)13.66”(347.0 mm)14.03”(356.2 mm)0.20”(5.1 mm)1.55”(39.3 mm)4 Places0.213” (5.41 mm)Front of PanelMounting BracketVertical Enhanced Front ViewVertical Enhanced Top ViewVertical Enhanced Mounting PanelCUTOUTFront of PanelReference onlyTerminal BlocksFrontBezelFront of PanelMounting BracketVertical Enhanced Side View843809A2.cdr
