GE PACSystems RXi User Manual

Chapter 8. Gigabit Ethernet (GbE) Interface Overview and OperationGFK-2816F August 2015 159Minor Error Codes for Major Error Code 11H (at Remote Server Controller)Error Status(Hexadecimal) SRTP Error Description0111H Generic SRTP error.0211H The controller is inaccessible.0311H Reserved.0411H Unexpected SRTP version encountered in received message.0511H Unrecognized SRTP message received.0611H Data present in SRTP message, which should not contain data.0711H Generic resource problem detected.0811H SRTP message encountered in inappropriate connection state.0911H Generic refusal by backplane driver to handle request.0A11H Recognized but unsupported SRTP message received.0B11H Lost transaction in server.0C11H Error sending SRTP PDU to the client controller.1411H Unable to allocate a text buffer from dual port memory.1711H Invalid text length detected in a mailbox message.1811H Invalid number of destinations detected in a mailbox message.1911H Invalid source detected in a mailbox message.1A11H Invalid slot number detected in a mailbox message.1B11H Invalid rack number detected in a mailbox message.1D11H Bad text buffer address in dual port memory.2111H Unable to find control data required to send a mailbox message to the controller.2211H Timed out waiting for availability of mail communications with the controller.2311H Invalid task ID detected while attempting to send a mailbox message to the controller.2411H Unable to send mailbox message to controller because the mail queue is full.2611H Unable to communicate with controller.2711H Backplane driver not initialized or unable to acquire a dual port memory semaphore.2A11H The backplane driver could not access the controller.2B11H Invalid binding on the message sent to the backplane driver.2C11H The message could not be sent to its destination because the mailbox was not open.2D11H The maximum number of transfers to the destination is already taking place.2E11H The maximum number of transfers of this transfer type is already taking place.2F11H Cannot obtain a backplane transfer buffer.3011H Cannot obtain resources other than backplane transfer buffers.3111H Connection ID or block transfer ID is not valid.3211H Timed out waiting for controller CPU response.3311H The controller CPU aborted the request.3411H An invalid message type was specified.3511H The specified task is not registered.3611H The mailbox offset specified is invalid.3711H The backplane task could not be registered because the message response handler was not specified.3811H The backplane task could not be registered because the unsolicited mailbox message handler was notspecified.3911H The backplane task could not be registered because a required parameter was not specified.3A11H More than the allowable byte length in a single transfer.3B11H Bad sequence number in the request.3C11H Invalid command in request.3D11H Response length does not match length specified in the response qualifier.3E11H Request failed because the controller’s Service Request Processor is not initialized.