GE PACSystems RXi User Manual

Chapter 4. Configuration58 PACSystems* RXi Distributed IO Controller User Manual GFK-2816FAdding Modules to a Remote NodeTo add a module to the remote node, right click on the PNS icon in the Navigator and selectChange Module List. In the right pane of the Change Module List window, expand the list ofmodule types.The following example shows the list of module types for a VersaMax PNS. For modulessupported by a particular PNS type, refer to the documentation for that device.Select modules from the list and drag them to their slot locations in the remote node.(If you need to delete a module on the left, select it and press the keyboard Delete key).When the modules on the left are correct, click OK to add them to the configuration.Configuring Module ParametersAfter adding modules to the remote node, their parameters must be configured. This includesconfiguring a set of basic parameters (such as: reference address, length, scan set, carrier,report faults). For configuration details for those basic parameters refer to the documentationfor the PNS module.Some PNS modules support submodules. The configuration process for these is similar tothat for modules.