Maintaining and Troubleshooting the PM880 8-3February 2005Checking the PM880 Memory StatusThe PM880 stores all types of files in its memory. Each type ofManager enables you to monitor the size of a file and theremaining amount memory. To check the memory status:Accessing the Site, Drive or Log Manager1. If the menu is not active, press [MENU].2. To check:• site, meter, log or snapshot files, press Site and press[ENTER].• log files only, press Logging and press [ENTER].3. Use the arrow key to scroll to:• Site Manager and press [ENTER] - to check site files only.• Drive Manager and press [ENTER] - to check all types offiles.• Log Manager and press [ENTER] - to check log files only.Selecting a Log File1. Use the arrow key to scroll to the desired files. If you do notsee the desired log in the list, refer to Viewing All Logs onpage 5-9 to display all the existing logs.Note: The list of files in each Manager can be listedchronologically or alphabetically. Refer to Sorting Filesin the Site/Drive/Log Manager on page 6-15.2. Check the lower right-hand corner of the window. You shouldsee the current date and time, the size of the selected file andthe remaining amount of memory.What’s Next?Do one of the following:• To check the size of another file, use the arrow keys toscroll to the desired file.• To exit and return to taking measurements, press [F3] (Exit)and then press [MENU].
