Maintaining and Troubleshooting the PM880 8-9February 2005Resetting to Factory Default SettingsThe Factory Defaults command enables you to return the meter toits preprogrammed default settings. The PM880 replaces thedefault site file and the global meter settings with the factorydefault settings. To reset the meter:1. Transfer or print all sites and logs. Refer to Chapter 7, Usingthe PM880 with a PC and Printer.!WARNING!ALL SETTINGS IN THE DEFAULT SITE WILL BE RESET.BE SURE TO TRANSFER OR PRINT ALL SITESAND LOGS BEFORE RESETTING!2. If the menu is not active, press [MENU].3. Use the arrow keys to scroll to Service and press [ENTER].4. Use the arrow keys to scroll to Factory Defaults and press[ENTER]. The screen appears similar to Figure 8-5 below.Figure 8-5: The Factory Defaults Window
