February 20054-6 Using Special FeaturesSetting a Probe Calibration ReminderThe Probe ID command enables you to enter the probe serialnumber, calibration dates and a calibration reminder. Use thefollowing steps to enter probe data:Accessing the Probe ID Tab1. If the menu is not active, press [MENU].2. Use the arrow key to scroll to Program and press [ENTER].3. Use the arrow key to scroll to Calibrate and press [ENTER].4. Use the arrow keys to scroll to the Probe ID tab and press[ENTER]. A screen similar to Figure 4-2 appears.Figure 4-2: The Probe ID WindowEntering Probe Information1. Use the arrow keys to scroll to S/N and press [ENTER].2. Use the numeric keys to enter the serial number from theCalibration Data Sheet and press [ENTER]. The serial numberis also scribed on the hex nut of the moisture probe.
