Maintaining and Troubleshooting the PM880 8-13February 2005Setting Remote Access SecurityThe PM880 enables you to set remote access security for eachsecurity level. Remote access consists of allowing the PM880 tocommunicate with PanaLink (GE Infrastructure Sensingsoftware), receive files from a PC via IrDA, and transmit files to aPC via IrDA. To set remote access:Note: The remote access security settings are only available tousers with Operator or Service level passcodes.1. Press [MENU].2. Use the arrow keys to scroll to Service and press [ENTER].3. Use the arrow keys to scroll to Security Settings and press[ENTER].4. Use the arrow keys to move to the Level tab and press[ENTER]. The screen appears similar to Figure 8-7 below.Figure 8-7: Security Level Window5. Use the arrow keys to move to Security Level and press[ENTER] to open the drop-down menu.6. Scroll to the desired level and press [ENTER].
