CHAPTER 4: SOFTWAREPQMII POWER QUALITY METER – INSTRUCTION MANUAL 4–114.4 Using the EnerVista PQMII Setup Software4.4.1 Entering SetpointsThe System Setup page will be used as an example to illustrate the entering of setpoints.Z Select the Setpoint > System Setup menu item. The following windowwill appear:When a non-numeric setpoint such as CT WIRING is selected, EnerVista PQMII SetupSoftware displays a drop-down menu:When a numeric setpoint such as PHASE CT PRIMARY is selected, EnerVista PQMIISetup Software displays a keypad that allows the user to enter a value within thesetpoint range displayed near the top of the keypad:Z Click Accept to exit from the keypad and keep the new value. Click onCancel to exit from the keypad and retain the old value.Z In the Setpoint / System Setup dialog box, click on Store to save thevalues into the PQMII.Z Click OK to accept any changes and exit the window.Z Click Cancel to retain previous values and exit.
