GE VAT2000 Instruction Manual

Also see for VAT2000 Series: Instruction manual Instruction manual

Contents

6. Control Functions and Parameter Settings6-17Sequence CommandSE S3 S2 S1 S0Selectedramp timeOFF OFF OFF B41-0B42-0OFF OFF ON B41-1B42-1OFF ON OFF B41-2B42-2OFF ON ON B41-3B42-3ON OFF OFF B41-4B42-4ON OFF ON B41-5B42-5ON ON OFF B41-6B42-6ON ON ON B41-7B42-7Block-B parameters (S/W option constants) listApplicationNo. Parameter Unit Default Min. Max. FunctionST V/f VEC PMB40 – Software option function0 Function selection – 1 1 1. 4 = 1: Following functions are not used= 2: Program ramp function= 3: Pattern Run= 4: Traverse run1 Function selection – 2 1 1. 3 = 1: Following functions are not used= 2: PID= 3: PID, multi-pump control B41 – Program ramp – acceleration01234567Acceleration time – 0– 1– 2– 3– 4– 5– 6– 7secsecsecsecsecsecsecsec10.010.010.010.010.010.010.010.00.10.10.10.10.10.10.10.16000.06000.06000.06000.06000.06000.06000.06000.0Select as follows with S0, S1, S2, S3and SE.B42 – Program ramp – deceleration01234567Deceleration time – 0– 1– 2– 3– 4– 5– 6– 7secsecsecsecsecsecsecsec20.020.020.020.020.020.020.020.00.10.10.10.10.10.10.10.16000.06000.06000.06000.06000.06000.06000.06000.0The binary mode ordirect input mode isselected with B11-8.Sequence CommandSE S3 S2 S1 S0Selectedramp timeOFF OFF OFF OFF OFF LatestvaluesOFF OFF OFF OFF ON B41-0B42-0OFF OFF OFF ON OFF B41-1B42-1OFF OFF ON OFF OFF B41-2B42-2OFF ON OFF OFF OFF B41-3B42-3ON OFF OFF OFF OFF LatestvaluesON OFF OFF OFF ON B41-4B42-4ON OFF OFF ON OFF B41-5B42-5ON OFF ON OFF OFF B41-6B42-6ON ON OFF OFF OFF B41-7B42-7(1) For Binary mode selection (1) For Direct mode selectionSE and S3 are not usedWhen S0 to S3 are all OFF the latest ramptime set value is hold. After power ON thelatest value is cleared to “0”