CHAPTER 4: INTERFACES FRONT PANEL INTERFACEC60 BREAKER PROTECTION SYSTEM – INSTRUCTION MANUAL 4-214• The C60 settings have been saved to a settings file• The UR front panel label cutout sheet (GE part number 1006-0047) has been downloaded fromhttp://www.gedigitalenergy.com/products/support/ur/URLEDenhanced.doc and printed• Small-bladed knifeTo create custom LED labels for the enhanced front panel display:1. Start the EnerVista UR Setup software.2. Select the Front Panel Report item at the bottom of the navigation menu for the settings file. The front panel reportwindow displays.Figure 4-23: Front panel report window3. Enter the text to appear next to each LED and above each user-programmable pushbutton in the fields provided.4. Feed the UR front panel label cutout sheet into a printer and press the Print button in the front panel report window.5. When printing is complete, fold the sheet along the perforated lines and punch out the labels.6. Remove the UR label insert tool from the package and bend the tabs as described in the following procedures. Thesetabs are used for removal of the default and custom LED labels.The label package shipped with every C60 contains the three default labels, the custom label template sheet, and the labelremoval tool.If the default labels are suitable for your application, insert them in the appropriate slots and program the LEDs to matchthem. If you require custom labels, use the following procedures to remove the original labels and insert the new ones.NOTEUse the tool EXACTLY as outlined as follows, with the printed side containing the GE part number facing theuser.
