CHAPTER 5: SETTINGS PRODUCT SETUPC60 BREAKER PROTECTION SYSTEM – INSTRUCTION MANUAL 5-135To enable the security system and require password use:1. Select the Security > User Management menu item to open the user management window.2. Check the Enable Security check box in the lower-left corner to enable the security management system.Security is now enabled for the EnerVista UR Setup software. Upon starting the software, users are now required to enter ausername and password.Add a new user accountThe following pre-requisites are required to add user accounts to the EnerVista security management system:• The user adding the account must have administrator rights• The EnerVista security management system must be enabled (previous section)To add a user account:1. Select the Security > User Management item from the top menu to open the user management window.2. Enter a username in the User field. The username must be 4 to 20 characters in length.NOTEIf you force password entry by using this feature, ensure that you know the Administrator password. If you donot know the password and are locked out of the software, contact GE Digital Energy for the default passwordor a UR device. When using CyberSentry, the default password is "ChangeMe1#".
