CHAPTER 3: INSTALLATION CONNECT TO THE C60C60 BREAKER PROTECTION SYSTEM – INSTRUCTION MANUAL 3-5134. Click the “Use the following IP address” box.5. Enter an IP address with the first three numbers the same as the IP address of the C60 relay and the last numberdifferent (in this example, 1.1.1.2).6. Enter a subnet mask equal to the one set in the C60 (in this example, 255.0.0.0).7. Click the OK button to save the values.Before continuing, test the Ethernet connection.1. Open a Windows console window, for example by selecting Start > Run from the Windows Start menu and typing“cmd” or clicking the Start button and entering "cmd".2. Type the following command, substituting the IP address of 1.1.1.1 with yours:C:\WINNT>ping 1.1.1.13. If the connection is successful, the system returns four replies similar to the following:Pinging 1.1.1.1 with 32 bytes of data:Reply from 1.1.1.1: bytes=32 time<10ms TTL=255Reply from 1.1.1.1: bytes=32 time<10ms TTL=255Reply from 1.1.1.1: bytes=32 time<10ms TTL=255Reply from 1.1.1.1: bytes=32 time<10ms TTL=255Ping statistics for 1.1.1.1:Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),Approximate round trip time in milliseconds:Minimum = 0ms, Maximum = 0ms, Average = 0 ms4. Note that the values for time and TTL vary depending on local network configuration.5. If the following sequence of messages appears when entering the C:\WINNT>ping 1.1.1.1 command:Pinging 1.1.1.1 with 32 bytes of data:Request timed out.Request timed out.Request timed out.Request timed out.Ping statistics for 1.1.1.1:Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),Approximate round trip time in milliseconds:Minimum = 0ms, Maximum = 0ms, Average = 0 msPinging 1.1.1.1 with 32 bytes of data:verify the physical connection between the C60 and the computer, and double-check the programmed IP address inthe Product Setup Communications Network IP Address setting, then repeat step 2.6. If the following sequence of messages appears when entering the C:\WINNT>ping 1.1.1.1 command:Pinging 1.1.1.1 with 32 bytes of data:Hardware error.Hardware error.Hardware error.Hardware error.Ping statistics for 1.1.1.1:Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),Approximate round trip time in milliseconds:Minimum = 0ms, Maximum = 0ms, Average = 0 msPinging 1.1.1.1 with 32 bytes of data:verify the physical connection between the C60 and the computer, and double-check the programmed IP address inthe PRODUCT SETUP COMMUNICATIONS NETWORK IP ADDRESS setting, then repeat step 2.7. If the following sequence of messages appears when entering the C:\WINNT>ping 1.1.1.1 command:Pinging 1.1.1.1 with 32 bytes of data:Destination host unreachable.Destination host unreachable.Destination host unreachable.Destination host unreachable.
