3-44 C60 BREAKER PROTECTION SYSTEM – INSTRUCTION MANUALCONFIGURE THE C60 FOR SOFTWARE ACCESS CHAPTER 3: INSTALLATION3Figure 3-51: Identifying the UR device type6. Select the complete path, including the new directory name, where the EnerVista UR Setup software is to be installed.7. Click the Next button to begin the installation. The files are installed in the directory indicated, and the installationprogram automatically creates icons and adds an entry to the Windows start menu.8. Click Finish to complete the installation. The UR device is added to the list of installed intelligent electronic devices(IEDs) in the EnerVista Launchpad window, as shown.Figure 3-52: UR device added to Launchpad window3.7 Configure the C60 for software accessYou connect remotely to the C60 through the rear RS485 or Ethernet port with a computer running the EnerVista UR Setupsoftware. The C60 also can be accessed locally with a computer through the front panel RS232 port or the rear Ethernetport using the Quick Connect feature.• To configure the C60 for remote access via the rear RS485 port, see the next section.• To configure the UR for remote access via the rear Ethernet port, see the Configure Ethernet Communication section.• To configure the C60 for local access with a computer through either the front RS232 port or rear Ethernet port, seethe Connect to the C60 section.• To discover automatically UR devices and configure the software for them, see the Automatic Discovery of UR Devicessection.
