Garmin AQUAMAP 10x2 Series Owner's Manual

Also see for AQUAMAP 10x2 Series: Installation instructions Owner's manual Installation instructions

Contents

Garmin AQUAMAP 10x2 Series Owner's Manual Manual pdf 22 page image

12 AQUAMAP™ 10x2/12x2 SERIEScourse line does not appear. Changes in the speed, course over ground, orrate of turn information transmitted by the vessel can impact the calculation ofthe projected course line.When course over ground, heading, and rate of turn information are providedby an activated AIS target, the projected course of the target is calculatedbased on the course over ground and the rate of turn information. Thedirection in which the target is turning, which is also based on the rate of turninformation, is indicated by the direction of the barb at the end of the headingline. The length of the barb does not change.When course over ground and heading information are provided by anactivated AIS target, but rate of turn information is not provided, theprojected course of the target is calculated based on the course over groundinformation.Showing AIS and MARPA VesselsBefore you can show AIS vessels on a chart, you must have an external AISdevice and active transponder signals from other vessels. Mini AutomaticRadar Plotting Aid (MARPA) functionality works with radar.You can configure how other vessels appear on a chart or on a 3D chart view.The display range and MARPA settings configured for one chart or one 3Dchart view are applied only to that chart or to that 3D chart view. The details,projected heading, and trails settings configured for one chart or one 3D chartview are applied to all charts and to all 3D chart views.1 From a chart or a 3D chart view, select MENU > Other Vessels > DisplaySetup.2 Select an option:• To indicate the distance from your location in which AIS vessels appear,select Display Range, and select a distance.• To show MARPA-tagged vessels, select MARPA > Show.• To show details about AIS-activated and MARPA- tagged vessels,select MARPA > Show.• To set the projected heading time for AIS-activated and MARPA-taggedvessels, select Proj. Heading, and enter the time.• To show the tracks of AIS vessels, and the length of the track using atrail, select Trails, and select the length.Activating a Target for an AIS Vessel1 From a chart or a 3D chart view, select an AIS vessel.2 Select AIS Vessel > Activate Target.Viewing Information about a Targeted AIS VesselYou can view the AIS signal status, MMSI, GPS speed, GPS heading, andother information that is reported about a targeted AIS vessel.1 From a chart or a 3D chart view, select an AIS vessel.2 Select AIS Vessel.Deactivating a Target for an AIS Vessel1 From a chart or a 3D chart view, select an AIS vessel.2 Select AIS Vessel > Deactivate.Viewing a List of AIS and MARPA Threats1 From a chart or a 3D chart view, select MENU > Other Vessels > List >Show.2 Select the type of threats to include in the list.AIS Distress SignalsSelf-contained AIS distress signal devices transmit emergency positionreports when activated. The AQUAMAP can receive signals from Search and