21AQUAMAP™ 10x2/12x2 SERIESTracks > Marks & Waypoints.NOTE: The Marks & Waypoints menu can also be accessed from anyscreen by selecting NAV INFO > User Data > Marks & Waypoints.2 Select New Waypoint and select an option:• To create the waypoint by entering position coordinates, select EnterCoordinates, and enter the coordinates.• To create the waypoint using a chart, select Use Chart, select thelocation, and press SELECT.Creating a Waypoint on the Sonar Screen1 From a sonar view, use the arrow keys to select a location.2 Press SELECT.3 If necessary, edit the waypoint information.Creating a Waypoint on the Chart1 From a chart or a 3D chart view, select a location or object.2 Select Create Waypoint or press MARK WPT MOB.Marking an SOS LocationYou can mark an SOS location. When a Garmin VHF radio is connectedusing NMEA 2000, you can select different SOS types, such as Man-Overboard and Piracy.1 Hold MARK WPT MOB for one second.2 Select the SOS type.3 If necessary, select OK to navigate to the man overboard location.If you selected OK, the AQUAMAP sets a direct course back to the location. Ifyou selected another type of SOS, the call details are sent to the VHF radio.You must send the call using the radio.Viewing a List of all WaypointsFrom a Nav. chart or 3D chart view, select MENU > Marks, Wpts &Tracks > Marks & Waypoints.Editing a Saved Waypoint1 From a Nav. chart or 3D chart view, select MENU > Marks, Wpts &Tracks > Marks & Waypoints.2 Select a waypoint.3 Select Review > Edit.4 Select an option:• To add a name, select Name, and enter a name.• To change the symbol, select Symbol.• To change the depth, select Depth.• To change the water temperature, select Water Temp..• To change the comment, select Comment.Moving a Saved Waypoint1 From a Nav. chart or 3D chart view, select MENU > Marks, Wpts &Tracks > Marks & Waypoints.2 Select a waypoint.3 Select Review > Position.4 Indicate a new location for the waypoint:• To move the waypoint while using the chart, select Use Chart, select anew location on the chart, and select Move Waypoint.• To move the waypoint using coordinates, select Enter Coordinates,and enter the new coordinates.
