Garmin AQUAMAP 10x2 Series Owner's Manual

Also see for AQUAMAP 10x2 Series: Installation instructions Owner's manual Installation instructions

Contents

Garmin AQUAMAP 10x2 Series Owner's Manual Manual pdf 72 page image

62 AQUAMAP™ 10x2/12x2 SERIESFrom a Radar screen or the Radar overlay, select MENU > Radar Setup> Crosstalk Rej..Radar Options MenuFrom a radar screen, select MENU > Radar Options.MotionScope™: Uses the Doppler effect to detect and highlight movingtargets to help you avoid potential collisions, find flocks of birds, and trackweather formations. This option is only available on Fantom models.Pulse Exp.: Increases the duration of the transmit pulse, which helpsmaximize the energy directed toward targets. This helps to enhance thedetection and identification of targets. This option is not available on xHDopen array or HD/HD+ radome models.Target Size: Adjusts the size of targets, by adjusting the pulse compressionprocessing. Select smaller targets for a sharp, high resolution radar image.Select larger targets to display larger echos for point targets, like boatsand buoys. This option is only available on Fantom models.Echo Trails: Enables you to track the movement of vessels on the radarscreen. This option is not available on xHD open array or HD/HD+ radomemodels.Rain Clutter: Reduces the clutter caused by rain.Show VRM/EBL: Shows the variable range marker (VRM) circle and theelectronic bearing line (EBL) to allow you to measure the distance andbearing from your boat to a target object.Enable Guard Zone: Sets a safe zone around your boat and sounds analarm when anything enters the zone.Timed Transmit: Helps conserve power by transmitting radar signals at setintervals.Radar Setup MenuFrom a radar screen, select MENU > Radar Setup.Source: Selects the radar source when more than one radar is connected tothe network.Chart Display: Shows the chart under the radar image.When enabled, the Chart Setup menu appears.Orientation: Sets the perspective of the radar display.Crosstalk Rej.: Reduces the appearance of clutter caused by interferencefrom another nearby radar source.Rotation Spd.: Sets the preferred speed at which the radar rotates. The HighSpeed option can be used to increase the refresh rate. In some situations,the radar automatically rotates at the normal speed to improve detection,for example, when a longer range is selected or when MotionScope orDual range is used.Appearance: Sets the color scheme, look-ahead speed, and navigationappearance.Installation: Allows you to configure the radar for the installation, such assetting the front of the boat and the antenna park position.Radar Appearance SettingsFrom a radar screen, select MENU > Radar Setup > Appearance.NOTE: These settings do not apply to the radar overlay.Bkgd. Color: Sets the color for the background.Foreground Clr.: Sets the color scheme for the radar returns.Look-Ahd. Spd.: Shifts your present location toward the bottom of the screenautomatically as your speed increases. Enter your top speed for the bestresults.Heading Line: Shows an extension from the bow of the boat in the directionof travel on the radar screen.Range Rings: Shows the range rings that help you to visualize distances onthe radar screen.Bearing Ring: Shows a bearing relative to your heading or based on a north