34 AQUAMAP™ 10x2/12x2 SERIESTacking and Gybing from Wind HoldBefore you can engage wind hold, you must have a wind sensor installed.1 Engage wind hold.2 Press MENU.3 Select an option.The autopilot steers your boat through a tack or gybe, and informationabout the progress of the tack or gybe appears on the screen.Setting a Tack and Gybe DelayThe tack and gybe delay allows you to delay steering a tack and gybe afteryou initiate the maneuver.1 From the autopilot screen, select MENU > Autopilot Setup > SailingSetup > Tack Delay.2 Select the length of the delay.3 If necessary, select Done.Enabling the Gybe InhibitorNOTE: The gybe inhibitor does not prevent you from manually performing agybe using the helm or step steering.The gybe inhibitor prevents the autopilot from performing a gybe.1 From the autopilot screen, select MENU > Autopilot Setup > SailingSetup > Gybe Inhibitor.2 Select Enabled.Heading Line and Angle MarkersThe heading line is an extension drawn on the map from the bow of theboat in the direction of travel. Angle markers indicate relative position fromthe heading or course over ground, which are helpful for casting or findingreference points.Setting the Heading and Course Over Ground LinesYou can show the heading line and the course over ground (COG) line on thechart.COG is your direction of movement. Heading is the direction the bow of theboat is pointed, when a heading sensor is connected.1 From a chart view, select MENU > Chart Setup > Chart Appearance >Heading Line.2 If necessary, select Source, and select an option:• To automatically use the source available, select Auto.• To use the GPS antenna heading for COG, select GPS Heading(COG).• To use data from a connected heading sensor, select Heading.• To use data from both a connected heading sensor and the GPSantenna, select COG and Heading.This displays both the heading line and the COG line on the chart.3 Select Display, and select an option:• Select Distance > Distance, and enter the length of the line shown onthe chart.• Select Time > Time, and enter the time used to calculate the distanceyour boat will travel in the specified time at your present speed.Turning on Angle MarkersYou can add angle markers to the map along the heading line. Angle markerscan be helpful for casting when fishing.1 Set the heading line.2 Select Angle Markers.
