Garmin AQUAMAP 10x2 Series Owner's Manual

Also see for AQUAMAP 10x2 Series: Installation instructions Owner's manual Installation instructions

Contents

Garmin AQUAMAP 10x2 Series Owner's Manual Manual pdf 76 page image

66 AQUAMAP™ 10x2/12x2 SERIES7 Copy the backup file on the card and paste it to any location on thecomputer.Restoring Backup Data to AQUAMAP1 Insert a memory card into a card reader that is attached to the computer.2 Copy a backup file from the computer to the memory card, into a foldernamed Garmin\UserData.3 Insert a memory card into the card slot.4 Select NAV INFO > User Data > Data Transfer > Replace from Card.Saving System Information to a Memory CardYou can save system information to a memory card as a troubleshootingtool. A product support representative may ask you to use this information toretrieve data about the network.1 Insert a memory card into the card slot.2 Select Settings > System > System Information > Garmin Devices >Save to Card.3 If necessary, select the memory card to save system information to.4 Remove the memory card.Digital Selective CallingNetworked AQUAMAP and VHF Radio FunctionalityIf you have a NMEA 0183 VHF radio or a NMEA 2000 VHF radio connectedto your AQUAMAP, these features are enabled.• The AQUAMAP can transfer your GPS position to your radio. If your radiois capable, GPS position information is transmitted with DSC calls.• The AQUAMAP can receive digital selective calling (DSC) distress andposition information from the radio.• The AQUAMAP can track the positions of vessels sending position reports.If you have a Garmin NMEA 2000 VHF radio connected to your AQUAMAP,these features are also enabled.• The AQUAMAP allows you to quickly set up and send individual routinecall details to your Garmin VHF radio.• When you initiate a man-overboard distress call from your radio, theAQUAMAP shows the man-overboard screen and prompts you to navigateto the man- overboard point.• When you initiate a man-overboard distress call from your AQUAMAP, theradio shows the Distress Call page to initiate a man-overboard distresscall.Turning On DSCSelect Settings > Other Vessels > DSC.DSC ListThe DSC list is a log of the most recent DSC calls and other DSC contactsyou have entered. The DSC list can contain up to 100 entries. The DSC listshows the most recent call from a boat. If a second call is received from thesame boat, it replaces the first call in the call list.Viewing the DSC ListBefore you can view the DSC list, the AQUAMAP must be connected to aVHF radio that supports DSC.Select NAV INFO > DSC List.Adding a DSC ContactYou can add a vessel to your DSC list. You can make calls to a DSC contactfrom the AQUAMAP.1 Select NAV INFO > DSC List > Add Contact.2 Enter the Maritime Mobile Service Identity (MMSI) of the vessel.3 Enter the name of the vessel.