40 AQUAMAP™ 10x2/12x2 SERIESsee the bottom and the fish approaching the boat.1 Color legend2 Boat3 Ping indicator4 Fish5 Bottom6 RangeFrontVü Sonar ViewThe Panoptix FrontVü sonar view increases your situational awareness byshowing obstructions under the water, up to 91 meters (300 feet) in front ofthe boat.The ability to effectively avoid forward collisions with FrontVü sonardecreases as your speed rises above 8 knots.To see the FrontVü sonar view, you must install and connect a compatibletransducer, such as a PS21 transducer. You may need to update thetransducer software.Changing the Sonar View1 From a combination screen with sonar, select the window to change.2 Select MENU > Edit Combo.3 Select a sonar view.Selecting the Transducer TypeBefore you can select the transducer type, you must know what kind oftransducer you have.This AQUAMAP is compatible with the Garmin ClearVü™ transducer as wellas a range of accessory transducers including Garmin GT transducers, whichare available at Garmin.com. For information about compatible transducers,go to Garmin.com/transducers.If you are connecting a transducer that was not included with the AQUAMAP,you may need to set the transducer type to make the sonar function properly.If the device automatically detected your transducer, this option does notappear.1 From a sonar view, select MENU > Sonar Setup > Installation >Transducer Type.2 Select an option:• If you have a 200/77 kHz, dual-beam transducer, select Dual Beam(200/77 kHz).• If you have a 200/50 kHz, dual-frequency transducer, select Dual
