78 AQUAMAP™ 10x2/12x2 SERIESViewing VideoBefore you can view video, you must connect to a compatible source.Compatible devices include video devices connected to the ports on theAQUAMAP or to the Garmin Marine Network, as well as supported network(IP-based) video cameras, encoders, and thermal cameras.Select A/V, Gauges, Controls > Video.Selecting a Video Source1 From the video screen, select MENU > Source.2 Select the source of the video feed.Alternating Among Multiple Video SourcesIf you have two or more video sources, you can alternate between them usinga specific time interval.1 From the video screen, select MENU > Source > Alternate.2 Select Time, and select the amount of time each video appears.3 Select Source, and select the video sources to add to the alternatingsequence.Networked Video DevicesNOTICEA Garmin Power over Ethernet (PoE) Isolation Coupler (P/N 010-10580-10)must be used when connecting a PoE device, such as a FLIR® camera, toa Garmin Marine Network. Connecting a PoE device directly to a GarminMarine Network AQUAMAP damages the Garmin AQUAMAP and maydamage the PoE device.Before you can view and control video devices such as IP cameras,encoders, and thermal cameras using your AQUAMAP, you must have acompatible video device connected to your AQUAMAP, and you must havea marine network cable Power over Ethernet (PoE) isolation coupler. Go toGarmin.com for a list of compatible devices or to purchase a PoE IsolationCoupler.You can connect multiple supported video cameras and up to two videoencoders to the Garmin Marine Network. You can select and view up to fourvideo sources at once.AQUAMAPs with multiple composite built-in video inputs can display a singlebuilt-in video input only. When the cameras are connected, the networkdetects them automatically and displays them in the source list.Using Video Presets on Networked Video CamerasYou can save, name, and activate video presents for each networked videosource.Saving Video Presets on a Networked Video Camera1 From a video screen, touch the screen. The video controls appear on thescreen.2 Hold a video preset button.A green light indicates the setting is stored.
