23AQUAMAP™ 10x2/12x2 SERIESTracksA track is a recording of the path of your boat. The track currently beingrecorded is called the active track, and it can be saved. You can show tracksin each chart or 3D chart view.Recording TracksFrom a chart or a 3D chart view, select MENU > Marks, Wpts & Tracks >Tracks > On.A trailing line on the chart indicates your track.Managing the Track Log Memory During Recording1 From a chart or a 3D chart view, select MENU > Marks, Wpts & Tracks >Active Tracks > Active Track Options > Record Mode.NOTE: The Tracks menu can also be accessed from any screen byselecting NAV INFO > User Data > Tracks.2 Select an option:• To record a track log until the track memory is full, select Fill.• To continuously record a track log, replacing the oldest track data withnew data, select Wrap.Configuring the Recording Interval of the Track LogYou can indicate the frequency at which the track plot is recorded. Recordingmore frequent plots is more accurate but fills the track log faster. Theresolution interval is recommended for the most efficient use of memory.1 From a chart or a 3D chart view, select MENU > Marks, Wpts & Tracks >Active Tracks > Active Track Options.2 Select an option:• To record the track based on a distance between points, selectDistance > Change, and enter the distance.• To record the track based on a time interval, select Time > Change,and enter the time interval.• To record the track plot based on a variance from your course, selectResolution > Change, and enter the maximum error allowed from thetrue course before recording a track point. This is the recommendedrecording option.Setting the Color of the Active Track1 From a chart or a 3D chart view, select MENU > Marks, Wpts & Tracks >Active Tracks > Active Track Options > Track Color.2 Select a track color.Saving the Active TrackThe track currently being recorded is called the active track.1 From a chart or a 3D chart view, select MENU > Marks, Wpts & Tracks >Active Tracks > Save Active Track.2 Select an option:• Select the time the active track began.• Select Entire Log.3 Select Save.Clearing the Active TrackFrom a chart or a 3D chart view, select MENU > Marks, Wpts & Tracks >Active Tracks > Clear Active Track.The track memory is cleared, and the active track continues to berecorded.Retracing the Active TrackThe track currently being recorded is called the active track.1 From a chart or a 3D chart view, select MENU > Marks, Wpts & Tracks >Active Tracks > Follow Active Track.
