73AQUAMAP™ 10x2/12x2 SERIESViewing GraphsBefore you can view graphs of various environmental changes, such astemperature, depth, and wind, you must have an appropriate transducer orsensor connected to the network.Select NAV INFO > Trip & Graphs > Graphs.Setting the Graph Range and Time ScalesYou can indicate the amount of time and the range of depth that appear in thedepth and water temperature graphs.1 From a graph, select Graph Setup.2 Select an option:• To set a time-elapsed scale, select Duration. The default setting is10 minutes. Increasing the time- elapsed scale allows you to viewvariations over a longer period of time. Decreasing the time-elapsedscale allows you to view more detail over a shorter period of time.• To set the graph scale, select Scale. Increasing the scale allows youto view more variation in readings. Decreasing the scale allows you toview more detail in the variation.• To set the graph scale to the default scale, select Reset Scale.Setting Weather AlarmYou can set a weather alarm to warn you when there is an abrupt change inatmospheric pressure.1 From the Atm. Pressure graph, select Graph Setup.2 Select Weather Alarm > On.3 Select Monitor Range, and select a range to monitor.Battery ManagementYou can view the battery and other power sources, and the devices that usethose sources.Batteries are listed along the top of the screen. Other sources of power, suchas solar, alternator, converter, and wind generator, are listed along the leftside. The items along the right side of the screen are devices that use thebatteries and other power sources.Setting Up the Battery Management Page1 Select A/V, Gauges, Controls > Battery Management > MENU > EditDevices.2 Select an item.3 Select Device, and select an item from the list.4 If necessary, select Name, enter a name for this device, and select Done.5 If necessary, select Change Icon, select a new symbol, and select Done.6 Repeat steps 2 through 5 for each device.
