3-33190-01150-02 Rev. J Garmin G500H Pilot’s GuideForewordSec 1SystemSec 2PFDSec 3MFDSec 4HazardAvoidanceSec 5AdditionalFeaturesSec 6Annun.& AlertsSec 7SymbolsSec 8Glossary Appendix AAppendix BIndex3.2.1.4 PFD Options - Nav StatusWhen selected, Nav Status information is displayed on the PFD either on thetop of the display (Style 1) or to the left of the HSI (Style 2).1) While viewing the System Setup page of the AUX page group, press the smallMFD knob to activate the cursor. Turn the large MFD knob to highlight thedesired Nav Status value.2) Turn the small MFD knob to select the style and press ENT.Style 1 - Top of DisplayStyle 2 - Left of HSIFigure 3-45 Nav Status Style3) After the Nav Status style is selected, the chosen style will be displayed on thePFD.NOTE: Nav Status option is not available for all installations.3.2.1.5 Temperature ReferenceThe computer calculates the temperature based on temperature probe andpitot/static inputs. The units (°C or °F) and temperature reference are selectedon the AUX – SYSTEM SETUP page. The temperature reference can be selectedto one of the following choices:• Static Air Temperature (SAT) – This is the calculated temperature of thestationary (static) outside air. Conceptually, this is the temperature thatwould be read on a thermometer floating stationary at the current location.• Total Air Temperature (TAT) – This is the calculated temperature of theoutside air as it moves past the aircraft, including the rise in temperaturedue to air compression and friction at the current airspeed.
