3-8Garmin G500H Pilot’s Guide 190-01150-02 Rev. JForewordSec 1SystemSec 2PFDSec 3MFDSec 4HazardAvoidanceSec 5AdditionalFeaturesSec 6Annun.& AlertsSec 7SymbolsSec 8GlossaryAppendix AAppendix BIndex3.1.8 Measuring DistancesThe “Measure Bearing/Distance” function provides a quick and easy methodto determine the bearing and distance between any two points on the NavigationMap.1) While viewing one of the Navigation Map pages of the Map page group, pressMENU.2) Turn the large or small MFD knobs to highlight “Measure Bearing/Distance“ and then press ENT.Figure 3-8 Navigation Map Measure Distance Function3) Your present position will be marked as the starting reference point. To choose adifferent starting reference point, turn the large or small MFD knobs to desiredpoint and press ENT.Figure 3-9 Measure Distance Starting Reference Point4) Turn the large or small MFD knobs to move the cursor to a reference point. Thedistance and bearing is displayed at the top of the display.Ending ReferencePoint positionEnding Reference PointStarting Reference PointFigure 3-10 Bearing/Distance Measurement5) Press the small MFD knob to stop measuring.
