4-22Garmin G500H Pilot’s Guide 190-01150-02 Rev. JForewordSec 1SystemSec 2PFDSec 3MFDSec 4HazardAvoidanceSec 5AdditionalFeaturesSec 6Annun.& AlertsSec 7SymbolsSec 8GlossaryAppendix AAppendix BIndex4.6.1.1 Displaying and Operating Traffic (TAS Systems)The Traffic Map Page shows surrounding TAS traffic data in relation to theaircraft’s current position and altitude. Traffic page orientation is always headingup. The traffic mode and altitude filter mode are annunciated in the upper leftcorner.Traffic Advisory,Off Scale Aircraftis Out of Range,1200 ft Above andClimbingOperatingModeTraffic Advisory,Aircraft is 5000ft Above andDescendingRange RingDiameterNon-ThreatTrafficProximity Advisory,1200 ft Above andClimbingOwnshipSymbolNon-Bearing Traffic (System is Unable toDetermine Bearing), Aircraft Distance is8.0 NM, 1100 ft Above and DescendingFigure 4-24 Traffic Map Page - TAS/TCAS4.6.1.2 Switching from Standby Mode to Operating ModesThe unit must be in operating mode for traffic to be displayed.1) While viewing the Traffic page of the MAP page group, select the OPERATE softkey or press the MENU key and turn the small MFD knob to select OperatingMode.2) To switch to Standby Mode from the Traffic Page, select the STANDBY softkey.3) Select the ALT MODE soft key to change the altitude volume.4) Select the STANDBY soft key to place the system in the Standby mode.STANDBY is displayed in the Traffic mode field.
