4-109190-01150-02 Rev. J Garmin G500H Pilot’s GuideForewordSec 1SystemSec 2PFDSec 3MFDSec 4HazardAvoidanceSec 5AdditionalFeaturesSec 6Annun.& AlertsSec 7SymbolsSec 8Glossary Appendix AAppendix BIndex4.9.5 NEXRAD Weather Setup1) While viewing the FIS-B weather page, press the Menu key.2) With the Weather Setup selection highlighted, press ENT.4.9.5.1 Weather Page Map OrientationThe Orientation option sets the orientation of the Wx Data Link Map pages.1) While viewing the FIS-B Weather Map 1, 2, or 3 of the Wx page group, pressthe MENU key. With “Weather Setup” highlighted, press ENT.2) With the “Map Orientation” option active, turn the small MFD knob to changethe highlighted value.Figure 4-89 Weather Page Map Orientation3) Press ENT to accept the displayed value. The next option will be highlighted.4) Press the small MFD knob to cancel selection or to end editing and return tothe Navigation Map page or turn the large MFD knob to the next option.4.9.5.2 NEXRAD Data Viewing RangeThe NEXRAD Viewing Range option allows you to select the map rangewhere at and below the selected value NEXRAD weather products will be shownon the selected MFD FIS-B Weather Map page (1, 2, or 3). When Off is selected,NEXRAD weather data will not be shown. Where a value (such as 250 NM) isselected, NEXRAD data will be shown at map ranges of that value (250 NM)and lower.1) While viewing a FIS-B Weather Map page of the WX page group, press theMENU key to display the Page Menu Options. The cursor flashes on the“Weather Setup” option. Press ENT.2) The NEXRAD Data Viewing Range value will be highlighted. Turn the smallMFD knob to highlight the desired value.3) Press ENT to accept the displayed value. The next option will be highlighted.4) Press the small MFD knob to cancel selection or to end editing and return tothe Navigation Map page or turn the large MFD knob to the next option.
