2-26Garmin G500H Pilot’s Guide 190-01150-02 Rev. JForewordSec 1SystemSec 2PFDSec 3MFDSec 4HazardAvoidanceSec 5AdditionalFeaturesSec 6Annun.& AlertsSec 7SymbolsSec 8GlossaryAppendix AAppendix BIndex• GPS is the bearing source and an active waypoint is not selected• ADF is selected and a signal is not received (if you have an ADF that supportsa valid flag then the bearing pointer will be removed. If your ADF systemdoes not include a valid flag then the bearing pointer will still be displayed,regardless of ADF signal validity.)Bearing 2 PointerBearing 1Pointer IconBearing 2Pointer IconBearing 2 SourceGPS Levelof ServiceCurrent Navigation SourceCDI Bearing 1 PointerBearing 1 SourceFigure 2-32 HSI with Bearing InformationCDI Source GPS ModeGPS AdvisoryLOI SuspendMSGLOI OBSSUSPGPS1GPS2VOR1VOR2LOC1LOC2OCNENRTERMAPRLNAVLNAV+VLPVLNAV/VNAVLPLP+V1.00nm0.30nmFigure 2-33 PFD HSI Annunciations1) Press the PFD soft key to display the navigation source keys.2) Press the BRG 1 or BRG 2 soft keys to toggle between the available Navreceivers of the selected source (such as: GPS, NAV, or ADF).NOTE: The Bearing Line for navigation source 1 (BRG1) will be a single line.The Bearing Line for navigation source 2 (BRG2) will be a double line.
