3-24Garmin G500H Pilot’s Guide 190-01150-02 Rev. JForewordSec 1SystemSec 2PFDSec 3MFDSec 4HazardAvoidanceSec 5AdditionalFeaturesSec 6Annun.& AlertsSec 7SymbolsSec 8GlossaryAppendix AAppendix BIndex2) Turn the small MFD knob to change the highlighted value.3) Press ENT to accept the displayed value.4) Press the small MFD knob to cancel selection or to end editing and return tothe Navigation Map page or turn the large MFD knob to the next option.When the Traffic overlay is active on a Map page, a Traffic icon will bedisplayed on the Map page where it is selected.Traffic OverlaySelected IconTraffic OverlaySmart Key LabelFigure 3-32 Navigation Map Traffic Overlay3.1.10.4 Aviation Feature OptionsThe Aviation group selection from the Map Setup Page Menu allows you tocustomize the display of SafeTaxi information, Runway Extensions, Intersection/NDB locations, VOR locations, and TFR icons on the Navigation Map.Figure 3-33 Navigation Map Page Menu Aviation Group SelectionSafeTaxi™ Viewing RangeThe SafeTaxi™ viewing range option selects the range at which SafeTaxiinformation is shown on the Navigation Map. SafeTaxi will be shown at andbelow the selected map range. When Off is selected, SafeTaxi information willnot be shown. Where 1 NM is selected, the SafeTaxi information will be shownat map ranges of 1 NM and lower.Runway Extension RangeThe Runway Extension Range option selects the whether Runway Extensionsis shown for the flight plan destination airport runway. Runway Extensions willbe shown at and below the selected map range and will extend 10 NM. WhenOff is selected, Runway Extensions will not be shown.
